When working with 3d solid models in AutoCAD, always remember your important commands! isolines, re, 3dorbit (2009+), view, vscurrent.
Part: Ion firing assembly
File type: AutoCAD solid models (.dwg)
Created by: y0da900
Description: This file contains the following 3d solid parts: bolt, breech, fire chamber, bolstop. Quoth the author: I have successfully used this model to design new valves that fit into an Ion, so hopefully all the important dimensions are be accurate enough for most users.
Bolt: includes the HE dual o-ring modification on its tail.
Boltstop: Inside o-ring groove diameter is an approximation based on the Parker o-ring design manual.
Fire chamber: The inside depth is rough, as is the ID step diameter and ther leading angle behind the boltstop. These aren't critical dimensions though. Additionally the area under the swivel donut isn't complete (o-rings and c-clip groove).
Breech: Inside o-ring grooves are approximations but close enough to be worthy.
| |
|
Part: SP 360º QEV Assembly
File type: WinZip archive file: Inventor 2008 Part files (.ipt) and Inventor 2008 Assembly file (.iam)
Created by: Ydna
Description: Inventor assembly file for the 360º QEV. This contains the QEV components, seals, and poppet; also contained is an assembly structure that holds them all together with constraints.
| |
|
Part: NDZ Skeleton bolt v1
File type: Inventor 2008 Part file (.ipt)
Created by: Ydna
Description: NDZ' first version of their Skeleton bolt. They later released a version-2 which was lighter in weight.
| |
|
Part: ANS Warrior bolt
File type: Inventor 2008 Part file (.ipt)
Created by: Ydna
Description: Warrior bolt from ANS. There's a problem though....I can't remember if this is the defective versino-1 bolts or if it's the new/current version-2. The original v1 bolts snapped and broke almost pandemically. If I had to guess I'd say this is the version-1.
| |
|
Part: Stock feedneck
File type: Inventor 2008 Part file (.ipt)
Created by: Ydna
Description: Feedneck model, reasonably accurate from what I remember.
| |
|
Part: Mainboard - Tadao Raider
File type: Inventor 2008 Part file (.ipt)
Created by: Ydna
Description: Model for the Tadao Raider circuit board. If you need a model of a main board for your assembly, any board should work okay (including this one).
| |
|
