Spitlebug's files are provided in orthographic (multi-view 2d) file format without labeled dimensions. You can extract your own dimensions from the various files to view them if needed.
Part: ICD feedneck spec
File type: AutoCAD drawing (.dwg)
Created by: Brenden "Spitlebug" Gansner
Description: 2d feedneck specification drawing. This is used on the B2K4 as well as other ICD markers, also some other guns as well (other guns may use a slightly different profile, but are compatible).
| |
|
|
|
|
|
Part: Chaos 2k7 board
File type: SolidWorks 2008 part file (.sldprt)
Created by: Ydna
Description: Vaporworks Chaos board, 2007 version. This is a Bushmaster board but also has custom-install use in customized modifications (so long as the solenoid coil is small enough to be run by this board).
| |
|
Part: Milligrid 12-pin header housing
File type: SolidWorks part file (.sldprt)
Created by: Baldusi
Description: This plastic header housing is used with 2-mm pitch headers such as those used on Morlock boards, Bushmaster boards (Chaos etc) and others.
| |
|