Navigation:
Tech index -> CAD file post -> PBC Matrix LPR

These files would be handy if you're making a DM3 solid model.

Part: Reg mount File type: Inventor 2008 part file (.ipt) Created by: Ydna Description: Threaded regulator mount section, screws into the DM body, and attaches the reg housing on the forward end.

Part: Reg housing File type: Inventor 2008 part file (.ipt) Created by: Ydna Description: Screws onto the reg housing, and is locked in place with small set screws (not included).

Part: Adjustment endcap File type: Inventor 2008 part file (.ipt) Created by: Ydna Description: Endcap on the forward end of the LPR housing.

Part: Adjustment endcap spring File type: Inventor 2008 part file (.ipt) Created by: Ydna Description: Goes inside the adjustment endcap.

Part: Base seat File type: Inventor 2008 part file (.ipt) Created by: Ydna Description: Sandwiched between the reg mount and the reg housing.

Part: Piston File type: Inventor 2008 part file (.ipt) Created by: Ydna Description: Regulator piston, inside the LPR housing.

Part: Poppet File type: Inventor 2008 part file (.ipt) Created by: Ydna Description: Poppet, inside the front of the reg mount.

Part: Poppet spring File type: Inventor 2008 part file (.ipt) Created by: Ydna Description: Poppet spring behind the poppet.

Navigation:
Tech index -> CAD file post -> PBC Matrix LPR