This regulator is used on Shocker SFTs, and a version with a different reg body is used on Nerves.
Part: Regulator body (Shocker base model)
File type: Inventor 10 part file (.ipt)
Created by: Ydna
Description: Reg body, milling is suited for the Shocker SFT base model. Most of the private label markers used different external milling. This is the "current" version which has more internal ports and no adjustment lock screw hole.
| |
|
Part: Poppet guide section
File type: Inventor 10 part file (.ipt)
Created by: Ydna
Description: Top poppet guide section for the regulator.
| |
|
Part: Poppet guide set screw
File type: Inventor 10 part file (.ipt)
Created by: Ydna
Description: Set screw that locks the poppet guide in place.
| |
|
Part: Poppet base seat
File type: Inventor 10 part file (.ipt)
Created by: Ydna
Description: Poppet base seat, positioned under the poppet guide.
| |
|
Part: Poppet (demo)
File type: Inventor 10 part file (.ipt)
Created by: Ydna
Description: Demo model for the regulator poppet. In actuality the poppet is a two-piece assembly screwed together with an o-ring in the middle, but this is just for the external shape of the assembled poppet. You'll have to rotate the component to face vertically in assembly mode.
| |
|
Part: Poppet spring (uncmpressed)
File type: Inventor 10 part file (.ipt)
Created by: Ydna
Description: Poppet spring, uncompressed version. You'll have to rotate the component to face vertically in assembly mode.
| |
|
Part: Piston (v2)
File type: Inventor 10 part file (.ipt)
Created by: Ydna
Description: Brass regulator piston, version-2. The older version positioned the o-ring further down, which caused problems.
| |
|
Part: Adjustment spring guide
File type: Inventor 10 part file (.ipt)
Created by: Ydna
Description: Guide piece for the adjustment spring, located under the piston.
| |
|
|
Part: Adjustment endcap
File type: Inventor 10 part file (.ipt)
Created by: Ydna
Description: Brass adjustment endcap.
| |
|
