Navigation:
Tech index -> CAD file post - Max-Flo Inline

This regulator is used on Shocker SFTs, and a version with a different reg body is used on Nerves.

Part: Regulator manifold File type: Inventor 10 part file (.ipt) Created by: Ydna Description: Main housing section for the Inline regulator. The tank attaches at the rear, and reg body slides in the front. The external milling on this part has changed a few times; the model is one of a few versions (the changes don't affect the function).

Part: Regulator body, HP output File type: Inventor 10 part file (.ipt) Created by: Ydna Description: Reg body suited for HP output piston and parts.

Part: Poppet guide File type: Inventor 10 part file (.ipt) Created by: Ydna Description: Poppet guide component, behind the poppet spring.

Part: Poppet (demo) File type: Inventor 10 part file (.ipt) Created by: Ydna Description: Demo model for the regulator poppet. In actuality the poppet is a two-piece assembly screwed together with an o-ring in the middle, but this is just for the external shape of the assembled poppet.

Part: Poppet spring (uncompressed) File type: Inventor 10 part file (.ipt) Created by: Ydna Description: Poppet spring, uncompressed version.

Part: Piston, HP output File type: Inventor 10 part file (.ipt) Created by: Ydna Description: Regulator piston, suited for the HP reg body.

Part: Adjustment spring guide File type: Inventor 10 part file (.ipt) Created by: Ydna Description: Guide piece for the adjustment spring, located in front of the piston.

Part: Adjustment spring, HP output (uncompressed) File type: Inventor 10 part file (.ipt) Created by: Ydna Description: Uncompressed model for the HP adjustment spring.

Part: Adjustment spring bumper File type: Inventor 10 part file (.ipt) Created by: Ydna Description: Plastic spring bumper, placed in front of the spring.

Part: Adjustment spring filter element File type: Inventor 10 part file (.ipt) Created by: Ydna Description: Metallic filter element, placed on the inside of the adjustment endcap.

Part: Adjustment endcap File type: Inventor 10 part file (.ipt) Created by: Ydna Description: Adjustment endcap. No threading on the lock screw hole.

Part: Smartvalve shaft (demo) File type: Inventor 10 part file (.ipt) Created by: Ydna Description: Demo model for the Smartvalve knob/shaft. The knob's lever is actually a separate piece, but they're assembled together in this model.

Navigation:
Tech index -> CAD file post - Max-Flo Inline