Navigation:
My Markers -> Competition markers -> YdnaIon

Here's my high-level Ion. I use it for testing out my own modifications, and of course for testing aftermarket products as well. I've gone through a lot of different parts in this gun but right now I'm just leaving it alone until I finish with some other projects.
· Ion serial 11902
· NDZ aluminum blade trigger
· Smart Parts 360 QEV
· Modified stock bolt
· Prototype Tadao Ion board
· Relocated blue LED
· Blue lazer eyes (homemade)
· Punishers blue polished frame with 15º vertical adapter
· SP Micro Max-Flo preset

Pictured with an All American 0.693 back.

I've done a few mods to the gun involving the electronics. First is the relocated LED. I used a 3-mm blue superbright LED on the rear of the frame, as shown.

I also modified the eye daughterboard to allow for special modified lazer eyes. This involved a blue LED, new phototransistor (modified to fit in the gun), and all new resistors.

The gun is used to test my homemade SRC prototypes, which the Tadao board helps with. There are added adjustments for it that no other board has. Sorry but no pictures of the firing assembly will be available of any portion of the bolt until it is finished and ready for sale.

This is the original marker that I modified with an LPR several months ago. When I received the new frame I removed the added pneumatics for the LPR and installed them on one of my other Ions. Details for the LPR mod can be found here.

Videos page

My current settings are...
Dwell 17 milliseconds
Input pressure 160-psi
Primary reg input 750-psi

Navigation:
My Markers -> Competition markers -> YdnaIon