Navigation:
My Markers -> Custom markers -> Electropneumag

This project began as the ULE body and X-valve from my Morlock E-Mag, which I then converted into the marker displayed on this page. The term pneumag is used to describe an Automag that uses an air-powered actuator to engage the sear, instead of the trigger with a regular mechanical Automag, or a huge solenoid as with the E-Mag. What I did was take the same pneumag principal and connect it to a solenoid valve, making the finished setup fully electropneumatic.

Details for this conversion:
· ULE body and rail
· X-Valve with level-10 bolt
· Shocker SFT frame, Dynasty trigger
· Converted gas-thru foregrip
· ANS JackhammerII LPR
· SMC SY113 series solenoid
· Clippard MPA-3 actuator
· Tadao Ion board
· Modified Omega Timer-grips
· SP ball detents

Details for this modification can be found in the custom work section.

Navigation:
My Markers -> Custom markers -> Electropneumag