Navigation:
My Markers -> Recreational markers -> DM3

This is an old Dye matrix DM3. Apparently it's a private label Shocktech version, or so the milling told me.
· CP trigger
· Ion vertical reg
· PBC LPR (new)
· New solenoid
· Tadao 5.0 M5 board
· SP ball detents
· Red visible eyes

This marker was working okay when I bought it, but everything fell to pieces as soon as I took it apart. The marker was in such a condition that you could put paint and air to it and it'd work okay, however the internals were fragile so everything fell apart as when I touched it. Notably, the LPR was trashed, and I had to replace the solenoid due to a cracked housing. After that I cleaned the entire thing (which was internally covered in grease and paint) and ended up rebuilding the whole electronics while I was at it. In doing so I installed red visible eyes, since I was already going to replace them.

I also did come miscallenous mods such as tapping it for larger screws (10-32 instead of the smaller 8-32, reason for this was so I could use screws from other guns), and installing SP detents in the breech since the stock ones were horrid.

Navigation:
My Markers -> Recreational markers -> DM3