ZDSPunisherspb.comHomeMarker TechStoreLinks
MY MARKERS - PRO/CARBINE
Contact me Legal information About the site

Navigation:
My Markers -> Recreational markers -> Pro/Carbine

This was one of my first markers (it was the first marker I bought new). I've still got it, and it still works fine. I've sold the gun a couple times but I always seem to end up with it after a few days/weeks. After doing that for a few years while trying to sell it, I just gave up and decided I would keep it. Here's the specifications:
· Tippmann Pro/Carbine serial 28437
· Diamond lab double trigger
· Psychoballistics Model98 Rocket Cock
· SP Freak Smartgrips
· SP old-style drop forward bar
· BSA lazersight with pressure-activated switch
· Prolite vertical adapter
· PMI 3-stage expansion chamber (serves as a foregrip)
· Freak barrel with 10" Freakfront
· Custom modified right-feed elbow, no horizontal foregrip
· Custom trigger job, very short trigger pull.

Pro/Carbine

Pro/Carbine

I performed one of my classic trigger jobs to the trigger/sear interaction, in effort to lessen the trigger pull stroke. It uses a relatively short pull with an almost "electronic" feel, with no obscure sideffects. No, I don't provide this service to the public...don't bother asking.

I took a Rocket Cock handle and guard from a Model98 kit and retrofitted it to work on this gun. The guard is epoxied onto the top of the frame, and serves it's purpose nicely. You can see I also cut off the stock foregrip covering the barrel and drilled/tapped the upper receiver for screws to hold the feedneck on.
Pro/Carbine

The gun has a nifty lazersight that can be acticated by pressing the button right behind the expansion chamber. All the kids at the field were scarred of "the gun with the lazer".
Pro/Carbine

Here is the original picture from the month that I bought the gun. I used to screw the CO2 tank right into the vertical adapter and let it hang there under the gun.
Pro/Carbine

In the future I am planning to install a custom ram/hammer setup along with a new board to make it fully electropneumatic. Althogh I have the materials for this mod, I'm not sure when I will actually get around to it.

Navigation:
My Markers -> Recreational markers -> Pro/Carbine

[ ZDSPB.com ] - [ TECH ]   [ STORE ]   [ LINKS ]   [ CONTACT ]   [ LEGAL ]