Navigation:
My Markers -> Competition markers -> 2004 Adrenalin Impulse

This was my first Impulse. I've since owned a few others, but this one remains one of my favorites due to the assortment of custom parts and extravagant old-school milling design from 03 (back when few guns were stylishly milled). I picked it up pretty cheap with a load of accessories, then sold the parts I didn't need to offset the cost.
· 2004 Adrenalin Impulse, serial AI196
· Blue fade anodizing, blast finish
· SP Titanium ram (counterbored) - this is a very limited part that I custom modified myself.
· SP Adrenalin Voodoo bolt - lightened.
· SP Adrenalin bolt pin (steel with aluminum top)
· NDZ piston housing endcap
· Adrenalin frame (v2 I think)
· Adrenalin magnetic double trigger with modified return magnets, 80-g trigger microswitch
· SP Adrenalin ball detents
· SP brass hammer
· Modified GP check valve for LPR attachment.
· SP Mini-Flo LPR with 5/32" microline (nearly three times the volume as 1/8" hose).
· KM2 Predator multi-purpose board
· Beam-break anti-chop eyes
· Solenoid LP core spring
· NDZ slim I-cover
· Freak barrel with 12" Freak front
· SP Smartgrips

Pictured with a vertical reg and HP tank.

Electronics:
Inside the gun is a KM2 Morlock board, mounted vertically next to the solenoid. As per my other Morlock installations, I cut out a small piece of plexiglass to mount the trigger microswitch. Somewhere in this process I also installed an adjustable magnet screw in the frame (so the trigger return wouldn't be horribly tight, and also so it'd be adjustable).

Navigation:
My Markers -> Competition markers -> 2004 Adrenalin Impulse