|
||
|
| ||
|
Screws & hardware:
· Generic/other markers · Ion · Shocker SFT ('03-'06) · Shocker NXT ('07+) · Nerve · Impulse ('00-'05) Electronics components:
Hose & fittings
Used items:
| USED SHOCKER SPORT PARTS
All of my Shocker Sport used items are listed on this page. This page has all factory/OEM parts only.
Bodies:
2000 right feed body with eye holes - This is used but functional. It has been drilled for 3mm anti-chop eyes and cover screw holes (I didn't do the milling; don't know who did). The body includes the body plugs, Shocker jewel, and brass fire piston ring.
2000 right feed body - Used but functional. This body was modified for a recessed rear macroline fitting, which is included. I don't know who did the modification. The body includes the body plugs, brass fire piston ring, feedtube, and front set screw installed.
2000 powerfeed body - Used but functional. Comes with powerfeed attachment and powerfeed plug installed, rear macroline fitting, Turbo jewel, body plugs, and brass fire piston ring installed.
2002 right feed body - Used but functional. This body was made in early 2002; I used it on one of my markers but took it off when I acquired a vertical feed body. It comes with the RF attachment, body plugs, and brass fire piston ring installed. (no manifold plugs or macroline).
Stock LS double trigger silver (this is series 2002)
Single trigger frame (black) - Stock single trigger frame from a 1998 Shocker; comes with no hardware. Trigger guard was cut so it'll accept double triggers if you want.
Modified double trigger frame (black) - Stock frame from a 1999 Shocker, modified for a double trigger. Comes with no hardware.
Circuit Boards:
At the moment I'm all sold out of all Shocker Sport boards. Sorry!
Firing assembly components:
Bolt piston housing - Housing for the bolt section, comes with new o-rings, but no bumpers. I have multiple available.
Bolt piston endcap - Endcap/guide for the bolt piston housing. These are older versions with flathead screwdriver removal. I have multiple available.
Bolt piston rod - Comes with new o-rings installed, but no bumpers. Be sure to grease the seals up with a thick coat before installing. These are series 2000 piston rods with flathead screwdriver removal.
Bolt bumper - These are used on the bolt piston. The large one goes between the bolt tip and the front of the housing; the small one goes in front of the head of the piston ram, inside the piston housing.
Fill poppet - 1999 series poppet, perfectly functional.
Poppet bushing - 1999 series poppet bushing, perfectly functional. Comes with the o-ring (not pictured)
Fill poppet rod
|
