|
||
|
| ||
|
Screws & hardware:
· Generic/other markers · Ion · Shocker SFT ('03-'06) · Shocker NXT ('07+) · Nerve · Impulse ('00-'05) Electronics components:
Hose & fittings
Used items:
| USED REGULATOR & MAX-FLO PARTS
Max-Flo Micro parts: Max-Flo micro front section - This appears to be a brand new part; it's black dust anodized. It doesn't have the smartvalve pin installed.
Max-Flo micro base seat - This screw component is hidden underneath the filter screen, on the tank side of the regulator. This part is new and has a new o-ring installed.
Shocker/Nerve vertical Max-Flo parts:
Base seat - This disk component is seated down within the top of the reg body.
Poppet spring - Poppet spring for an MFI or Shocker/Nerve vertical reg.
Max-Flo Inline (MFI) parts:
MFI adjustment knob - black dust anodized. It doesn't come with the lock screw (since I don't have them).
MFI reg manifold - the internal reg base system from an MFI. This will come with new o-rings installed.
MFI poppet spring - Poppet spring for an MFI or Shocker/Nerve vertical reg.
MFI poppet guide - This brass piece guides the rear of an MFI poppet. Comes with a new o-ring.
MFI Smartvalve knob - Comes with new o-rings.
Max-Flo manifold parts:
Max-Flo 3000 reg system - This is the regulator off one of Smart Parts' 3000 systems from 1999. It has LEFT-HAND TANK THREADS that are not compatible with a standard screw-in tank. The regulator itself is the same however the manifold is different. This comes with everything shown, which is two empty outputs on the regulator (for a gauge and macroline, not included). The regulator will be rebuilt before it ships.
Max-Flo 3000 reg system - Max-Flo 3000 like the system above, again with LEFT-HAND TANK THREADS. This one is missing all four output devices (gauge, macroline, bleed valve, plug, etc) and also doesn't come with a mounting rail. The regulator will be rebuilt before it ships.
Max-Flo manifold clamp - Black gloss anodized manifold clamp component for a 2000+ series bottomline Max-Flo.
Max-Flo adjustment endcap (short) - This is the new-style adjustment endcap (short). This won't fit the older regs that used a long adjustment spring unless you have the shorter spring. This part is used but works okay if you need a replacement.
Max-Flo adjustment endcap (long) - This is the old-style adjustment endcap (long). This fits only the older style manifold regs from Shocker Sport markers (1998-1999). You need to use this with the long adjustment spring, not the short one.
Max-Flo adjustment endcap spring (long) - Long spring from the older style manifold regs (1998-1999).
Max-Flo adjustment endcap spring pin
Max-Flo adjustment endcap spring pin guide
Max-Flo poppet filter element and retainer - This part is used but functional. This would be good for somebody that lost the entire retainer piece (brass part under the filter). The filter itself is a little rough but still works.
Max-Flo endcap screw - Black anodized endcap screw.
pVI poppet - Reg poppet for a first generation pneuVentures reg only. If you don't know which poppet you have, assume you have the later one and this won't fit.
pVI poppet guide - Reg poppet guide for a pneuVentures reg only. Again, if you don't know which poppet you have, assume you have the later one.
pVI endcap screw - Silver anodized endcap screw, this will fit a pneuVentures reg only.
|
