|
||
|
| ||
|
Screws & hardware:
· Generic/other markers · Ion · Shocker SFT ('03-'06) · Shocker NXT ('07+) · Nerve · Impulse ('00-'05) Electronics components:
Hose & fittings
Used items:
| USED IMPULSE PARTS
Nasty body - This is a used gloss red body, works fine but has the feedneck epoxied onto the top (stripped feedneck threads, I assume). The feedneck is an NDZ halo no-rise with o-rings so you won't have to worry about replacing it. Doesn't come with any internals except the required plugs installed.
Circuit housing - black anodized, has some small signs of wear but obviously works okay.
Modded Frame - Series 2000 double trigger frame, no hardware included. Trigger guard has been removed.
CP snatchgrip - Comes as shown, black, jewel intact, great condition. Screw not included.
Stock LS double trigger silver (this is series 2002)
Blade trigger - I'm not sure if this came from Eclipse or Smart Parts, but it shouldn't matter.
Firing Assembly Components: Stock piston housing - This is a 2002 series piston housing (more efficient than the older ones). It comes with all new o-rings, but no ram, bumpers, or endcap.
Stock piston endcap - 2000 series, anodized black. I have multiple available.
Evil Punch endcap - I think these parts fit the Evil "punch" piston for the Impulse (although I may be wrong). I have black, red, and blue available.
Stock hammer - Stock aluminum hammer. I have more than one of these available...the one you will receive might be black or silver.
Stock ram - Stock ram, comes with new o-ring installed, but no bumpers.
Replacement bumpers - These are used on the ram. The large one goes between the hammer and the front of the piston; the small one goes between the head of the ram inside the piston housing.
Stock bolt pin - 2002 series aluminum bolt pin. I have multiple available.
Modded Voodoo bolt - This was once a black voodoo delrin bolt, but it was cut and milled down a bit. It doesn't have the bearing, spring, or screw for the bolt pin (reuse your current ones).
Unknown delrin bolt - I'm not sure what company made this, but it's one of many Impulse delrin bolts that used to be available. Works great and comes with the bolt pin components (spring, pin, bearing).
SP Strange bolt - Same as the Voodoo bolt, except shaped a little differently on the outside, and obviously much shorter. Comes with all parts.
Warped Sportz bolt - I think this is a Warped Sportz "Function" bolt for the Impulse. It works okay even if that's not the brand. Comes with all parts.
Valve endcap - Stock valve endcap (series 2001), includes the o-ring.
Valve housing - Stock valve housing, includes new o-rings (not pictured). I have multiple available.
Valve poppet - Stock delrin valve poppet only, comes with a new o-ring.
Vertical adapter screw - Brand new and unused (retail for $9 each). I have lots of these.
|
