|
|
| REGULATOR, ASA, AND MAX-FLO USED PARTS |
|
| Used parts mainpage
Shocker Sport parts Impulse parts Shocker SFT parts Nerve parts AKALMP parts Automag parts Ion parts Intimidator parts Regulator, ASA, and Max-Flo parts Barrels |
Max-Flo 3000 reg system - This Max-Flo reg is the same as the screw-in versions except it uses left-handed fiber-wrapped tanks that SP cold back in the day. It won't work with a standard HPA or CO2 tank. This comes with everything shown, which is two empty outputs on the regulator (for a gauge and macroline, not included). The regulator will be rebuilt and tested before it ships.
Max-Flo 3000 reg system - Max-Flo 3000 like the system above. This comes with everything shown, which is two empty outputs on the regulator (for a gauge and macroline, not included). Comes with a mounting bracket as shown. The regulator will be rebuilt and tested before it ships.
Max-Flo Parts: Max-Flo manifold clamp - Black gloss anodized manifold clamp component for a 2000+ series bottomline Max-Flo.
Max-Flo manifold clamp - Black blast anodize manifold clamp component for a 2000+ series bottomline Max-Flo.
Max-Flo adjustment endcap - This is the new-style adjustment endcap (short). This won't fit the older regs that used a long adjustment spring unless you have the shorter spring. This part is used but works okay if you need a replacement.
Max-Flo adjustment endcap - This is the old-style adjustment endcap (long). This fits only the older style manifold regs from Shocker Sport markers (1998-1999). You need to use this with the long adjustment spring, not the short one.
Max-Flo adjustment endcap spring (long) - Long spring from the older style manifold regs (1998-1999).
Max-Flo adjustment endcap spring pin
Max-Flo adjustment endcap spring pin guide
Max-Flo poppet filter element and retainer - This part is used but functional. This would be good for somebody that lost the entire retainer piece (brass part under the filter). The filter itself is a little rough but still works.
Max-Flo endcap screw - Black anodized endcap screw.
Max-Flo adjustment endcap filter element
Max-Flo LP piston - This is the old-style piston, that fits a size 16 o-ring. This won't fit in any regulator made for Shocker/Imp after 2000. Includes new o-ring.
pVI poppet - Reg poppet for a first generation pneuVentures reg only. If you don't know which poppet you have, assume you have the later one and this won't fit.
pVI poppet guide - Reg poppet guide for a pneuVentures reg only. Again, if you don't know which poppet you have, assume you have the later one.
pVI endcap screw - Silver anodized endcap screw, this will fit a pneuVentures reg only.
Navigation:
|
