|
|
| IMPULSE USED PARTS |
|
| Used parts mainpage
Shocker Sport parts Impulse parts Shocker SFT parts Nerve parts AKALMP parts Automag parts Ion parts Intimidator parts Regulator, ASA, and Max-Flo parts Barrels |
2002 used body - This is a 2002 series Impulse body in functional condition. Has some scratches and other marks but works okay. It will accept all current Impulse accessories, including eyes, barrels, and feednecks. Impulse jewel not included.
2000 used body - This is a 2000 series preproduction Impulse body in functional condition. It has a lot of scratches and other marks but works okay. It will accept most current Impulse accessories, except for a few exceptions (it takes cut-down Shocker barrels, the feedneck is unthreaded, and there is no milling for the Vision eye).
Nasty body - This is a used gloss red body, works fine but has the feedneck epoxied onto the top (stripped feedneck threads, I assume). The feedneck is an NDZ halo no-rise with o-rings so you won't have to worry about replacing it. Doesn't come with any internals except the required plugs installed.
Circuit housing - black anodized, has some small signs of wear but obviously works okay.
Frame - Series 2000 double trigger frame, no hardware included.
Frame - Series 2000 double trigger frame, no hardware included. Trigger guard has been removed.
CP snatchgrip - Comes as shown, black, jewel intact, great condition. Screw not included.
Stock eye cover - no jewel included.
Stock piston housing - This is a 2002 series piston housing (more efficient than the older ones). It comes with all new o-rings, but no ram, bumpers, or endcap.
Stock piston endcap - 2002 series, anodized silver, has some light scuffing but looks good otherwise.
Stock piston endcap - 2000 series, anodized black. This has some minor scratching but work okay.
Evil Punch endcap - I think these parts fit the Evil "punch" piston for the Impulse (although I may be wrong). I have black, red, and blue available.
Stock hammer - Stock aluminum hammer (the one you will receive might be black or silver).
Evil hammer - Similar to the NDZ mid-weight hammers. Made from steel, but not a "heavyweight" hammer (it weighs about 32-g).
Heavyweight hammer - Heavyweight brass hammer made by SP. It's the heavest hammer you can find, at 48 grams. This one has some wear on it but works just fine.
Stock ram - Stock aluminum ram, comes with new o-ring installed, but no bumpers.
Replacement bumpers - These are used on the ram. The large one goes between the hammer and the front of the piston; the small one goes between the head of the ram inside the piston housing.
Stock bolt pin - 2002 series aluminum bolt pin.
Titanium bolt pin - This is an NDZ ti bolt pin, light and strong.
Modded Voodoo bolt - This was once a black voodoo delrin bolt, but it was cut and milled down a bit. It doesn't have the bearing, spring, or screw for the bolt pin (reuse your current ones).
Voodoo bolt - An unmodified delrin Voodoo bolt. This part is used and has some wear, but works perfectly fine. It has the bearing, screw, and spring installed so you won't have to re-use other parts.
NDZ Equ bolt - Full-length Equalizer bolt, it's got some small wear but works great.
Delrin bolt - I'm not sure what company made this, but it's one of many Impulse delrin bolts that used to be available. Works great and comes with the bolt pin components (spring, pin, bearing)
SP Strange bolt - Same as the Voodoo bolt, except shaped a little differently on the outside, and obviously much shorter. Comes with all parts.
WS bolt - I think this is a Warped Sportz "Function" bolt for the Impulse. It works okay even if that's not the brand. Comes with all parts.
OTB Blind bolt - A used Blind bolt from OTB. Decent condition; comes with all parts.
Valve endcap - Stock valve endcap (series 2001), includes the o-ring.
Valve housing - Stock valve housing, includes new o-rings (not pictured).
Valve poppet - Stock delrin valve poppet only, comes with a new o-ring.
Vertical adapter screw - Brand new and unused (retail for $9 each).
SP tapped solenoid optimizer (red) - LPR Tapeworm (solenoid optimizer) anodized red. This part came off an Adrenalin Impulse.
SP Tapeworm (blue) - Stanard "Tapeworm" (solenoid optimizer) anodized blue.
NDZ tapped solenoid optimizer (black) - NDZ high-flow LPR tapeworm. Has some scratches but works okay.
Navigation:
|
