Used parts mainpage Shocker Sport parts Impulse parts Shocker SFT parts Nerve parts AKALMP parts Automag parts Ion parts Intimidator parts Regulator, ASA, and Max-Flo parts Barrels

E/X-Mag HES pigtail - this is the male side of the HES plug into the board. It has about 1" of wires sticking out from the header. $5 shipped Level-10 bolt spares kit - This didn't come with a parts list so I'm not sure if it has all the components, however my guess is that it doesn't have everything. As a result I'm calling this a "parts kit" instead of an actual level-10 ugprade kit. Regardless here's a list of the items that I have: · Two separate bolt springs · Replacement carrier nut with o-ring, one shim, and one bumper · Level-10 carriers: Most are included, but not all. Each carrier has the outside o-ring, but only some have the inside o-ring. · Foamie tip · Bolt bumper · Thumbscrew bumper · other misc parts as shown in picture · Level-10 installation CD(?) I didn't even realize this was in here until I took the parts out for the picture. Not sure what's on the disk or if it works. $20 shipped RT mag valve spares kit - Appears to have everything as part of the original kit. Includes the following: (all o-rings are urethane) x1 - bolt spring x2 - barrel nubbins x1 - small square-shaped urethane disk (bumper?) x1 - thumbscrew urethane bumper x3 - 18/90 o-ring x1 - 17/90 o-ring x1 - 12/90 o-ring x2 - 10/90 o-ring x3 - 9/90 o-ring x2 - 8/90 o-ring x4 - 6/90 o-ring x2 - 4/90 o-ring I don't know where all these o-rings are used but I've included a picture of the parts list for reference. $15 shipped ULE body detent - black anodized, and I actually have a couple of these sitting here (trying to sell them all). I have a couple with the o-ring but not all of them have it. Note: I seem to remember hearing these were the same as older Angel detents? Not sure, but it might be the case. $8 shipped for one detent, discount if you get more than one (contact me if interested) Navigation: Store main -> Used Equipment -> Automag used parts