Screws & hardware: · Generic/other markers · Ion · Shocker SFT ('03-'06) · Shocker NXT ('07+) · Nerve · Impulse ('00-'05) Electronics components: · Switches/buttons · Connectors · Circuit boards · Capacitors · Opto components Hose & fittings Solenoid parts O-ring kits Used items: · Generic/other markers · Shocker SFT parts · Shocker Sport parts · Impulse parts · Nerve parts · Ion parts · Regulator and Max-Flo · Barrels Custom machining

SOLENOID PARTS I have several key components available that are used in Parker/Skinner solenoids. Unfortunately some of the major items like the spool or coil are too rare for me to keep in stock. Solenoid parts such as the ones on this page are typically not even available individually; the only parts I have in stock are ones I've pulled from unused solenoids. I don't have any other solenoid items available at the moment. These parts will work only with a Parker K-series solenoid; they won't work with any other solenoid brand. Check this picture if you are unsure which solenoid your Shocker or Nerve has. Many other types of complete solenoids can be purchased from Air Soldier Products. Below is an exploded diagram of the solenoid, for reference. Core - $4/ea Solenoid core, no spring included. Core spring - $1.10/ea Solenoid core spring; available in LP and HP. HP core spring is for Shocker Sport, Impulse without LPR, Shocker SFT/Nerve, and Luxe. LP core spring is for Impulse with LPR, Bushmaster, Defiant, Intimidator, and Tribal. Type LP HP Pilot section - $12/ea Complete pilot section, includes all the manual override components and the pilot internals, ready to go. Please note that the core gasket in the picture is not included! Three-way spool (new) - $20/ea K3 solenoid spool valve with all o-rings installed. This is a three-way spool for a K3Hxx solenoid, such as the one in a Shocker Sport 3000. Four-way spool (new) Sorry, these parts are no longer available. They're just impossible to keep in stock so I've given up on posting them available. Unavailable Spool housing - $8/ea Spool valve housing, available in the following types: K4H01 (four-way base mount) for Shocker Sport 4000, Impulse, Shocker SFT, Nerve, Tribal, and Defiant K3H01 (three-way base mount) for Shocker Sport 3000 only. Type four-waythree-way Endcap - $1.50/ea The endcap fits on the short end of the spool housing. The price is just for the endcap itself; no screws, spring, or butterfly gasket is included. Picture coming soon Endcap spring - $1/ea This small, conical spring is housed within the endcap. Picture coming soon Parker solenoid screws: Check this page: Generic screws Butterfly gaskey (aka. dynamic gasket) - $5/ea These "butterfly" gaskets are placed on either side of the spool housing. Out of stock. Out of stock Body gasket - $5/ea This gasket seals between the spool housing and the marker body; for Impulses, Shocker Sports, Bushmasters, Defiants, and Tribals. Out of stock until further notice. Out of stock Coil gasket - $1.50 Circular gasket that seals between the coil and pilot. Price is for one gasket. Add priority shipping to any order ($2 plus regular shipping fees):