YDNA'S VIDEOS |
Navigation:
Pictures & videos -> Ydna's videos
I've made a bazillion videos in the backyard whilst shooting friends' markers, my markers, and even some markers that have gone through the repair shop. In most of the faster non-semiauto videos, the firing speed was limited by the hopper, however the exact speed varies from video to video since I've gone through quite a few different hoppers.
Sometimes I'm the one firing the gun, but most of the time not.
You can stream the video off the page, or download it to your computer by right clicking and selecting save as. A thumb of the video is also provided in case you already downloaded it.
I unofficially started uploading new videos to my YouTube channel in 2009. It's there that you can find the most recent videos I've made, which include action clips and much more.
Date added: | Board/firmware: | Firing mode: | Max speed: | Comments: | Thumb: |
Shocker SFT: | |||||
2-24-2005 | Predator2 original | Fullyauto | 13-bps | First Predator install I ever performed. | thumb |
2-24-2005 | Predator 3.0 | Semiauto | 13-bps | Aiming at the barrels in the background (customer's gun). | thumb |
3-16-2005 | Predator 3.0 | Fullyauto | 17-bps | Testing my Shocker after installing the new board. | thumb |
4-5-2005 | DoubleCross | PSP ramp | 17-bps | Customer's gun. | thumb |
5-7-2005 | Predator AFA 3.0 | Fullyautomatic | 18-20 bps | Justin Grant testing an accidental Halo mod.. | thumb |
6-22-2005 | Predator AFA 3.0 | Fullyautomatic | 19-bps | Cheetah prototype test. The mist of pink paint killed the lawn to the right of the palette... | thumb |
9-7-2005 | Predator AFA 3.0 | Fullyautomatic | 18-bps | Victory board Halo with PR mod. | thumb |
11-23-2005 | Euclid board | Ramping | 18-bps | Testing a homemade board in a customer's ST Shocker. This was my attempt at a "ramping" mode, but it turned out more like fullyauto. | thumb |
11-23-2005 | Euclid board | Fullyautomatic | 21-bps | thumb | |
1-12-2006 | Predator AFA 3.0 | PSP ramp | 16-bps | Egg with Y-board. | thumb |
2-14-2006 | Tadao M6 | PSP mild ramp | 19-20 bps | Testing the new M6 programming in my gun. I especially enjoy how little the gun moves even though I'm barely holding onto it. Peak speed of 25-bps. | thumb |
4-6-2006 | Tadao M6 | PSP mild ramp | 16-bps | thumb | |
7-29-2006 | NoX | Linear ramp, level 1.5x | 19-bps | Board test. | thumb |
7-29-2006 | NoX | Semiauto | 16-bps | Board test, customer's gun. | thumb |
9-9-2006 | Tadao M6 | PSP ramp | 18-bps | Testing out my I-LEB beam-break converter prototype. (Also testing out the ZDS apparel) | thumb |
9-14-2006 | Tadao M6 | Semiauto | 16-bps | thumb | |
9-14-2006 | Tadao M6 | NXL fullyauto | 17-18 bps | thumb | |
10-3-2006 | Stock | Rebound level 4 | 17-18 bps | Rebound test with a new out of the box Shocker NXT. | thumb |
12-12-2006 | Tadao M6 | PSP ramp | 25-bps | Prototype loader. The regulator starts to drop off a ltitle. | thumb |
12-12-2006 | Tadao M6 | PSP ramp | 25-bps | Prototype loader | thumb |
12-12-2006 | Tadao M6 | PSP ramp | 26-bps | Prototype loader; 32-bps peak speed | thumb |
2-5-2007 | Tadao M7 | Max ramp | 17-bps | Pulse loader test, in red "pulse" mode | thumb |
5-2-2007 | NoX | NXL fullyauto | 17-18 bps | thumb | |
5-2-2007 | APE Rampage | Reactive | 15-bps | Marker firing in reactive mode, set to fire once on the pull and three times on the release (good for scenario play, I've found). Eyes off, set to 15-bps. | thumb |
5-2-2007 | APE Rampage | Reactive | 15-bps | Large res version of the above video. | thumb |
Luxe: | |||||
5-11-2008 | Stock | Rebound, semi | 20-bps | Testing the marker after a day of play. | thumb |
5-26-2008 | Stock | Rebound | 18-bps | thumb | |
6-15-2008 | Stock | Rebound | 18-bps | thumb | |
Impulse: | |||||
11-22-2004 | Vision board | Semiauto | 13-bps | Aiming at the barrels in the background (camera not focused). | thumb |
1-4-2005 | Predator AFA 2.1 | Autoresponse | 13-bps | Testing out the board install. Turns to fullauto at the end. | thumb |
1-4-2005 | Predator AFA 2.1 | Fullyauto | 13-bps | Again testing the gun out. | thumb |
1-4-2005 | Predator AFA 2.1 | Fullyauto | 12-bps | Low tank in this video, it runs out at the end. | thumb |
3-15-2005 | Predator AFA 2.1 | Fullyauto | 10-bps | VL200 gravity-fed hopper. | thumb |
4-28-2005 | Predator AFA 2.1 | Fullyauto | 8-bps | Speed test on an old Halo-A...it's clearly seen better days. | thumb |
5-10-2005 | Predator AFA 2.1 | Fullyauto | 16-17 bps | Making sure the gun works before a tournament. | thumb |
7-17-2005 | Predator AFA 2.1 | Autoresponse | 15-bps | thumb | |
8-22-2005 | Predator AFA 2.1 | Fullyauto | 16-bps | Low batteries in the Halo; gun set for runaway bounce. | thumb |
4-6-2006 | Predator AFA 2.1 | Autoresponse | 13-bps | Low batteries in the Halo. | thumb |
4-6-2006 | Predator-Morlock | Fullyauto | 13-bps | Testing out my Husher Impulse valve. Sorry the hopper was screwing up... | thumb |
9-13-2006 | Predator-Morlock | Semiauto | 15-bps | thumb | |
Nerve: | |||||
2-23-2005 | Tadao original | Semiauto | 16-bps | Old, swollen paint broke in the barrel. | thumb |
3-13-2005 | Predator AFA 3.0 | Fullyauto | 13-bps | VL200 gravity-fed hopper with more old paint. | thumb |
3-15-2003 | Predator AFA 3.0 | Hard ramping | 17-bps | Testing the custom-install board in my Nerve. | thumb |
3-15-2005 | Predator AFA 3.0 | Semiauto | 16-bps | More tests. | thumb |
3-26-2005 | Predator AFA 3.0 | Fullyauto | 17-bps | Testing out a Halo modification, which turns out didn't make any difference. | thumb |
4-5-2005 | DoubleCross | PSP ramp | 17-bps | Testing out the DoubleCross board in a customer's gun. | thumb |
5-10-2005 | Predator SFT 5.0 | Hard ramping | 19-bps | Eyes off (eye hardware not yet installed). | thumb |
5-16-2005 | Predator SFT 5.0 | Fullyauto | 20-bps | Testing a new Halo mod (this one did make a difference). | thumb |
5-16-2005 | Predator SFT 5.0 | Fullyauto | 22-bps | Firing consistent 22-bps with two peaks as fast as 27-bps. | thumb |
7-17-2005 | Predator SFT 5.0 | Autoresponse | - | Eyes off (this was using transparent paint that can't be seen in the breech). | thumb |
8-23-2005 | Predator SFT 5.0 | Semiauto | 15-bps | Ball broke on a tree branch in the foreground. | thumb |
9-7-2005 | Predator SFT 5.0 | Hard ramping | 17-bps | Consistent 17-bps with a 20-bps peak. | thumb |
11-23-2005 | Euclid board | Semiauto | 16-bps | thumb | |
2-22-2006 | Predator SFT 5.0 | Hard ramping | 17-bps | Testing out the prototype Cheetah; Ion stock barrel. | thumb |
7-29-2006 | Team board | Rebound level 8 | 17-bps | Playing with a new out of the box Nerve (last red Nerve sold by SP). | thumb |
8-20-2006 | Team board | Rebound level 9 | 13-bps | thumb | |
9-14-2006 | Predator SFT 5.0 | Semiauto | 16-bps | thumb | |
9-14-2006 | Predator SFT 5.0 | Fullyauto | 16-bps | thumb | |
12-12-2006 | Predator SFT 5.0 | Fullyauto | 24-bps | Prototype loader | thumb |
1-19-2007 | Tadao M3 | PSP ramp | 23-bps | Prototype loader. The reg sounds like it should be cleaned soon. | thumb |
1-19-2007 | Tadao M3 | PSP ramp | 24-bps | Prototype loader. Now the reg really needs to be cleaned. | thumb |
2-21-2007 | Tadao M7 | PSP ramp | 17-bps | Pulse loader on red mode. | thumb |
2-21-2007 | Tadao M7 | PSP ramp | 20-bps | Pulse loader on green synchronized mode. Firing consisteny 17-bps, with occasional peaks as high as 20. | thumb |
2-27-2007 | Tadao M7 | Autoresponse | 18-bps | Brand new Halo-B with z-code board. | thumb |
Shocker Sport: | |||||
2-23-2005 | Morlock original | Semiauto | - | "Circus" paint, a mixture of leftover brands and colors. | thumb |
2-23-2005 | Morlock original | Sniper mode | - | This mode will fire the ball when the trigger is pulled then wait until it is released to recock the bolt. | thumb |
2-23-2006 | Morlock original | Sniper mode | - | Better video of sniper mode. | thumb |
3-22-2006 | LS Turbo | Semiauto | 11-bps | Semiauto at 11-bps, then a little but of 9-bps Turbo mode at the end. | thumb |
Excalibur: | |||||
9-6-2005 | Tadao M5 | Semiauto | 13-bps | Playing with the new Tadao board. | thumb |
9-7-2005 | Tadao M5 | Semiauto | 13-bps | Ball broke on the tree branch in the foreground. | thumb |
9-7-2005 | Tadao M5 | PSP ramp | 14-bps | Firing in ramping mode, but the speed was limited by my sticking bolt ram. | thumb |
7-9-2007 | Tadao M5 | PSP ramp | 13-bps | thumb | |
7-9-2007 | Tadao M5 | NXL Fullyauto | 13-bps | thumb | |
Ion: | |||||
3-4-2005 | Predator AFA 3.0 | Fullyauto | 17-bps | My first time installing the board in an Ion. This was my project Ion marker; I later removed the board and went back to the stock setup. | thumb |
4-6-2005 | Predator AFA 3.0 | Autoresponse | 16-bps | Ion without a QEV, without the exoskeleton installed. | thumb |
4-6-2005 | Predator AFA 3.0 | Fullyauto | 21-bps | VL200 gravity-fed hopper. The gun was shaking in such a way that paint was flung down into the gun abnormally fast...weird. | thumb |
5-9-2005 | Predator AFA 3.0 | Fullyauto | 19-20 bps | This was one of my test Ions with reflective eyes installed. This was just a temporary install that I made for the purposes of testing. Here is a picture of the gun from the video (another pic). | thumb |
5-18-2005 | Predator AFA 3.0 | Fullyauto | 20-21 bps | This was the video that pbnation idiots claimed was "staged" or "edited". | thumb |
6-5-2005 | Predator AFA 3.0 | Hard ramping | 20-bps | Testing out CJPMunoz' Predator Ion. | thumb |
10-27-2005 | Blackheart | Semiauto | 20-bps | Debounce was set to 1-ms, causing the fast fire rate. | thumb |
11-23-2005 | Proclus board | Fullyauto | 19-bps | Testing out one of my multi-purpose boards, installed here in an Ion. | thumb |
1-12-2006 | Tadao M7 | Semiauto | 15-16 bps | thumb | |
1-12-2006 | Tadao M7 | Semiauto | 16-17 bps | Cheetah un-jam feature in there. This was using cheap Dunhams' paint, I'm very surprised I didn't break some in the barrel. | thumb |
1-12-2006 | Tadao M7 | PSP mild ramping | 20-bps | Ramp activation speed at 9-bps. | thumb |
1-12-2006 | Tadao M7 | NXL fullyauto | 20-bps | Recoil resultant of not holding the marker correctly. | thumb |
4-6-2006 | Tadao M7 | PSP mild ramping | 16-bps | The lake dried up this time of the year. | thumb |
1-17-2007 | Tadao M7 | Fullyauto | 25-28 bps | Prototype loader | thumb |
1-17-2007 | Tadao M7 | Fullyauto | 27-34 bps | Prototype loader. Fastest video I've ever made, one of the fastest videos out there. | thumb |
Mechanical Ion: | |||||
7-9-2005 | n/a | Semiauto | - | First time testing out the modification in the backyard. | thumb |
9-21-2005 | n/a | Semiauto | 14-bps | A re-done mod, faster and higher flowing. In this video I was using a Halo (jammed into the feedneck). Start out by simply pulling the trigger, then I start fanning it. I run out of paint at the end. | thumb |
9-20-2006 | n/a | Semiauto | 14-bps | I made this video after I added a vertical reg to the marker, then rebuilt the pneumatics. | thumb |
SuperIon: | |||||
5-21-2006 | Stock boards | Rebound | 10-12 bps | This video demonstrates the SuperIon while using Revolution hoppers, physically limited around 10-12 bps. | thumb |
5-21-2006 | Stock boards | Rebound | 10-12 bps | Same video as above, except from a different angle and at much higher resolution. Video is approx 10-MB in size. Thanks to DTM for the video. | thumb |
The SuperIon can be seen in action in several of our Monster Game 06 videos. | |||||
DM3: | |||||
2-21-2007 | Tadao M5 | PSP ramp | 16-bps | Pulse loader on red mode. | thumb |
DM4: | |||||
2-7-2006 | Tadao M6 chip | Semiauto | 16-bps | thumb | |
2-7-2006 | Tadao M6 chip | PSP mild ramping | 18-bps | thumb | |
3-22-2006 | Tadao M6 chip | PSP mild ramping | 18-bps | thumb | |
4-6-2006 | Tadao M6 chip | PSP mild ramping | 13-bps | Low batteries in the Halo. | thumb | Proto Rail:
9-15-2008 |
unknown |
unknown |
unknown |
Unloading a hopper during a game of open-play. |
thumb |
King Cobra:
| 2-20-2006 |
Stock |
Fullyauto |
15-bps |
The gun was actually set to 20-bps, but the board is primitive, so the ROF was decreased a bit (the hopper was most likely feeding around 19-bps, but the board timing slowed it down). |
thumb |
5-15-2006 |
Stock |
Fullyauto |
- |
Playing around with the gun between games on this day. |
thumb |
5-2-2007 |
Stock |
Semiauto |
16-bps |
Pulse loader on red mode |
thumb |
Invert Mini:
| 3-13-2007 |
Stock |
Semiauto |
- |
This was testing the gun out in the backyard with a ghetto-rigged tank setup, so I wasn't able to really fire the gun like I wanted. |
thumb |
5-2-2007 |
Stock |
Semiauto |
- |
Using a damaged tank (not screwd all the way in). I realized it was dropping off instantly, but continued making a slow-shooting video for some dumb reason. |
thumb |
Angel:
| 2-23-2006 |
Predator AFA 3.0 |
Semiauto |
15-16 bps |
That'll teach me to aim downward so far when using a Halo... |
thumb |
Ego:
| 5-11-2008 |
Stock |
Semiauto |
| End of the day low tank |
thumb |
5-11-2008 |
Stock |
Semiauto |
| End of the day low tank |
thumb |
Automag:
| 4-18-2006 |
AGD 3.2 |
Semiauto |
16-17 bps |
Amazingly that was only a barrel break. The level10 bolt did its job throughout the whole video. |
thumb |
4-19-2006 |
Predator AFA 3.0 |
Hybrid semiauto |
17-bps |
Testing the marker after installing the new board. |
thumb |
4-19-2006 |
Predator AFA 3.0 |
PSP ramp |
18-bps |
If this particular mag is set to 18-bps or faster, this is what happens (the solenoid was wired incorrectly). |
thumb |
Mayhem:
| 6-6-2006 |
Heron board |
Semiauto |
- |
Testing out the Mayhem on the top of the hottub. I used a prototype board to test it (picture). |
thumb |
5-16-2007 |
- |
Semiauto |
- |
A year later I finally get around to installing something in this gun so I can actually use it. This video was taken after I finished the mod one evening. |
thumb |
|
· Ions with Predator boards - The Ions in the above videos have multi-purpose Morlock boards retrofitted into them, this isn't a drop-in board. I no longer offer this modification because it cost too much to perform (wasn't really worth it in my opinion).
· Proclus board - These are customized multi-purpose boards I use in my own projects, or for testing.
· Euclid board - Customized Shocker SFT board I use for my own markers.
· Heron board - This is a homemade prototype circuit that I put together to test out a board design (the board was called Heron, for a Shocker Sport). I didn't end up oging anywhere with this project so I keep the homemade circuit around for testing.
· Prototype loader - This referrs to my CAP loader project, which can be read about in the custom work section.
Navigation:
Pictures & videos -> Ydna's videos